Fault Memory (Overview of Possible Faults)
- Data lead, air conditioner-PCm
- Data lead, navigation unit-PCm
- Data lead, PCm-navigation unit
- Data lead, DSP-PCm
- Speedometer A, navigation unit
- Signal, reverse gear-navigation unit
- Antenna, navigation unit
- Data lead, PCm-instrument cluster
- Data lead, instrument cluster-PCm
- Vehicle data record
- Program memory
- Signal, terminal 15 PCm
- Signal, terminal 86 s PCm
- Navigation, CD fault Control module faulty/navigation unit
- Navigation fault, gyro Control module faulty/navigation unit
- Connection to audio module
- Telephone, internal fault
- Connection to telephone
- Write error, Flash
- Video interface
- Fault, memory interface
- Fault, photo sensor Control module faulty
NOTE: Faults can be stored during initialisation of the PCm if all plugs are not connected.
If a fault appears under Environmental Condition in combination with an unrealistic date, e.g. 7 Feb. 36, the fault was stored at a time at which there was not yet any satellite reception.
The faults are stored only during the phase after terminal 86 s has been disconnected.