Fault Code 61

Fault Code 61

Central locking limit position - Unlocked not reached

Diagnostic conditions
- Central locking system switched to "Unlocked"

Possible cause of fault
- Incorrect country coding
- Short circuit to ground/open circuit in wiring between the alarm system control module, central locking switch or door locks
- Door lock (driver's/passenger's) faulty
- Control module faulty

Affected terminals
Plug A, pins 5, 28, 29, 30 and 32
Plug B, pin 3

NOTE: During troubleshooting, the micro switches of the door locks are tested in Step 4. The test is to be used only for vehicles with "Safe position". USA vehicles do not have a "Safe" position; "Driver's door secured" and "Passenger's door secured" are therefore displayed during the "Input signals" test.

Diagnosis/troubleshooting

Fault Code 61

Part 1:

Part 2:

Part 3:

Part 4: