Mechanical Fault While Ejecting Magazine

8OOA CD Changer

Mechanical fault while ejecting magazine

Diagnostic conditions
- Ignition on
- PCM2/CDR23 on
- Functional audio CD inserted correctly in CD changer
- Start CD changer
- Magazine damaged
- Magazine deformed

NOTE:
- Fault code 8003 is recorded in the PCM2 MMI if the operating buttons are actuated for '≥ 1 minute'.
- Deactivate the 'automatic traffic announcement' before performing the diagnosis on the PCM2/CDR23. If this is not done, the diagnosis will abort (software version [<] 03).

Possible cause of fault
- Magazine damaged or deformed
- CD changer faulty

NOTE:
- The MOST optical waveguide is connected to the following control modules:
- PCM2/CDR23
- CD changer
- Amplifier
- Telephone/telematics (optional)

Diagnosis/troubleshooting