Mode 5

Mode 5
The values of the last oxygen sensor test can be read out for each oxygen sensor in mode 5.







For the oxygen sensors ahead of the TWC (bank 1/2, sensor 1), the following PID's are supported:

$01 Rich-lean threshold voltage

Mode 45Pid$01 Adr$17
R. toL.Sen. Volt
B1 - S1 0.440 V

Programmed fixed value.

$02 Lean-rich threshold voltage

Mode 45Pid$02 Adr$17
L. toR. Sen. Volt
B1 - S1 0.440 V

Programmed fixed value.

$07 Minimum voltage of oxygen sensor during the test

Mode 45Pid$07 Adr$17
Min. Voltage
Spec.: 0.002: 0.395 V
B1 - S1 0.010 V

The specified range within which the voltage must lie and the actual value are displayed.

$08 Maximum voltage of oxygen sensor during the test

Mode 45Pid$08 Adr$17
Min. Voltage
Spec.: 0.495: 0.945 V
B1 - S1 0.830 V

The specified range within which the voltage must lie and the actual value are displayed.

$09 Time between two transitions

Mode 45Pid$09 Adr$17
Time between
Spec.: 0.20: 1.20 sec
B1 - S1 0.40 sec

The specified range within which the time must lie and the actual value are displayed.







$30 Shift in oxygen sensor characteristic towards rich

Mode 45Pid$30 Adr$17
[<] 10.2 sec
Spec.: 0.00: 1.20 sec
B1 - S1 0.00 sec

The specified range within which the time must lie and the actual value are displayed.

$31 Shift in oxygen sensor characteristic towards lean

Mode 45Pid$31 Adr$17
[<] 10.2 sec
Spec.: 0.00: 1.20 sec
B1 - S1 0.00 sec

The specified range within which the time must lie and the actual value are displayed.

$32 Averaged period

Mode 45Pid$32 Adr$17
[<] 10.2 sec
Spec.: 0.00: 4.00 sec
B1 - S1 1.80 sec

The specified range within which the time must lie and the actual value are displayed.

For the oxygen sensors after the TWC (bank 1/2, sensor 2), the following PID's are supported:

$01 Rich-lean threshold voltage

Mode 45Pid$01 Adr$17
R. toL Sen Volt
B1 - S2 0.440 V

Programmed fixed value.

$02 Lean-rich threshold voltage

Mode 45Pid$02 Adr$17
L. toR. Sen Volt
B1 - S2 0.440 V

Programmed fixed value.