Cooling Systems - Coolant Leaks at Clamps

Boxster
3/00 3848

Binder - 3, Automatic Transmission

11-10-00

Spring-Band Type Hose Clamps

Vehicle Type:
Boxster / Boxster S

Model Year:
As of 1997 (V) / 2000 (Y)

Concern:
Coolant leakage at the spring-band clamps in the engine cooling transmission cooling and heating systems

Information:
If coolant leaks are found at the hose connection points in the engine cooling, transmission cooling and heating systems, you must replace the spring-band type with screw-type hose clamps. Use the following layouts (in this bulletin) to locate the hose connection points, then reference the correct screw-type hose clamp.





Parts Information

Literature:
Boxster Technical Manual, Group 1:
> Repair: 19 38 17 - Draining and topping up with coolant

Boxster Technical Manual, Group 3:
> Repair: 38 60 19 - Removing and installing ATF cooler

Boxster Technical Manual, Group 8:
> Repair: 80 23 19 - Removing and installing heat exchanger





Boxster - 2.5 Liter





Boxster - 2.7 Liter





Boxster S - 3.2 Liter