Replacing Side Section

The following spare body parts are required for the repair "Replacing side section - Cabriolet":







Removing side section-Cabriolet from the body

Steps 1 - 6:

Remove the following accessories: convertible top Convertible Top, convertible top compartment lid, side-panel lining, release for front lid Hood Latch Release , rear spoiler, tail light, coolant expansion tank.

Procedures No. 1 - 6:

Inserting the side section-Cabriolet into the body

Steps 1 - 5:

CAUTION ! : Toxic zinc oxide is emitted when welding galvanized steel
- The work area must be well ventilated and the smoke gases must be removed with a suitable extraction system.

Procedures No. 1 - 5:

Inserting the side section-Cabriolet into the body

Steps 6 - 10:

CAUTION ! : Observe the working time of the adhesive (Item 6)
- The new part must be welded in within 30 minutes. Otherwise the adhesion of the adhesive is impaired.

Procedures No. 6 - 10:

Steps 11 - 14:

Procedures No. 11 - 14: