Learning Functions

Learning Functions

Immobilizer
The immobilizer code can be entered under menu item Learning functions/immobilizer after the alarm control module is replaced.


CAUTION: The immobilizer code cannot be deleted or changed again. An incorrect input will render the control module useless.

- Input and check immobilizer code carefully.


Transponder key
A new remote control can be adapted for the vehicle under menu item Learning functions/transponder key. After the alarm system control module is replaced and the immobilizer code is entered, the old transponders can be adapted to the new control module. Refer to Teaching hand-held transmitter Teaching The Hand-Held Transmitter and Reading out and transferring remote control. Reading Out And Transferring Remote Control

Remote control
Up to four remote controls can be adapted to the control module under menu item Learning functions/remote control. After the alarm system control module is replaced and the immobilizer code is entered, the old remote controls can be adapted to the new control module. Refer to Teaching hand-held transmitter Teaching The Hand-Held Transmitter and Reading out and transferring remote control. Reading Out And Transferring Remote Control

Reading out remote controls
Under the menu item Reading out remote controls, the data of the remote controls can be read out after the alarm system control module is replaced. If it is not possible to read out and transfer the remote controls (e.g. no communication with the control module), the old remote controls can be adapted to the new control module. Refer to Teaching hand-held transmitter Teaching The Hand-Held Transmitter

Transferring remote controls
Under the menu item Transferring remote controls, the data read out from the remote controls can be transferred to the new control module.