Roll Bar: Service Precautions

CAUTION: Risk of injury if the roll-over bar is triggered!

- All persons must remain out of the operating range of the roll-over bar during diagnosis.
- Always keep the operating range of the roll-over bar free (do not leave tools there).
- Install, remove and transport the roll-over bar only when it is extended (triggered).
- Repairs to the roll-over bar and actuators are not permitted.


CAUTION:

- The roll-over bar must be triggered during every inspection, but every two years at the latest, using the Porsche System Tester 2.

WARNING: Risk of damage!

- Only connect the diagnostic module when the ignition is off.