Engine Oil: Service and Repair

Engine Oil And Oil Filter Change

Engine Oil Change (Without Oil Filter)

NOTE: The oil filter only has to be replaced after every second oil change.

1. Jack up the vehicle at the points provided.

WARNING:
- Danger of scalding from draining oil!
- Wear protective equipment specified.







2. Undo oil drainage screw and collect the engine oil in a disposal container. Dispose of the waste oil in accordance with legal requirements.
3. Clean oil drainage screw and screw in with new aluminium sealing ring.

Tightening torque 50 Nm (37 ftlb.).

4. Fill in engine oil. The oil change quantity is approx. 8.5 liters after a dripping time of approx. 20 minutes.

Engine oil change (With oil filter)

NOTE: The oil filter only has to be replaced after every second oil change.

1. Jack up the vehicle at the points provided.

WARNING:
- Danger of scalding from draining oil!
- Wear protective equipment specified.







2. Undo oil drainage screw and collect the engine oil in a disposal container. Dispose of the waste oil in accordance with legal requirements.
3. Clean oil drainage screw and screw in with new aluminium sealing ring.

Tightening torque 50 Nm (37 ftlb.).

4. Undo oil filter with the special tool (release key) 9204 and unscrew.







5. Remove oil filter housing vertically downward. Drain remaining oil into a disposal container.







6. Remove filter element. Remove the filter downwards and dispose of in accordance with legal requirements.

NOTE: Do no remove O-ring with a sharp object







7. Clean oil filter housing -1- and replace O-ring seal. Clean the oil filter housing thoroughly inside and outside and replace the 0-ring -3-. The O-ring should not be levered off or cut with a sharp object (e.g. screwdriver).







8. Install filter element.
9. Install oil filter housing and tighten to 25 Nm (18.5 ftlb.).

Tightening torque 25 Nm (18.5 ftlb.).

10. Fill in engine oil. The oil change quantity is approx. 8.75 liters after a dripping time of approx. 20 minutes.