Rear Flexible Window of Cabriolet

Removing and installing flexible mar window of Cabriolet
The following tools and materials are required for removal and installation of the flexible rear window of the Cabriolet:

Special Tools:

Removing flexible rear window of Cabriolet

Steps 1 - 5:

WARNING: The tension bow seal can be damaged or destroyed; move the convertible top to service position during this work!
- Important: Observe the "Convertible top service position" procedure in order to avoid damage or destruction of the tension bow seal.
See: Convertible Top / Service and Repair. (Procedure 1) Service and Repair

Procedures No. 1 - 5:

Installing flexible rear window of Cabriolet

Steps 1 - 8:

CAUTION! It is not permissible to close the convertible top with a rear window which is not glued in!
Damage (tearing) to the zip fastener connection on the convertible-top covering!
- The adhesion (hot-melt process) between the rear window and the convertible-top covering must be implemented before closing the convertible top.

Procedures No. 1 - 3:

Procedures No. 4 - 7:

Procedures No. 8:

The belt strap tension must not be changed by entering or leaving the vehicle during the hot-melt process and the cooling time