Connectors: Overview

Plugs on control module

Plug Nos. 1 to 4

Figure 1:

The plugs each consist of two individual plugs which are clipped together. The 2-pole plug is intended for the load circuit (motor). The 3-pole plug is the signal circuit connection (Hall-effect sensor). When they are clipped together, plug nos. 1 to 4 each have 5 poles.

Plug No. 5

The plug consists of three individual plugs which are clipped together. Each individual plug has 3 poles. When it is clipped together, plug no. 5 has 9 poles.

Sequence of the individual plugs
The sequence of the individual plugs from left to right is as follows:

natural, blue, black

Connector View:

See the 3-pole plug in Figure for pin assignment. The pin numbers are printed on the side of the plugs.

Plug No. 6

Figure 3:

The plug consists of three individual plugs which are clipped together. Two individual plugs have 3 poles each, the third has 2 poles. When it is clipped together, plug no. 6 has 8 poles.

Sequence of the individual plugs
The sequence of the individual plugs from left to right is as follows:

blue, black, black

Plug No. 7

Connector View:

Plug No. 7 has 26 poles.

Plug Nos. 8 to 10

See Plug Nos. 1 to 4 above.