Initial Inspection and Diagnostic Overview

Identification

The diagnosis software number and control module part number can be read out under the Identification menu item.

Fault Memory

Stored faults can be read out under the Fault memory menu item.

Clear The Fault Memory

Faults stored in the control module can be erased under the Erase fault memory menu item. Here, all stored faults are erased.

Actual Values

In the Actual values menu item, the current values of the following parameters can be read out.

- Control module supply voltage
- Sensor supply voltage
- Distance from outer right sensor
- Distance from inner right sensor
- Distance from inner left sensor
- Distance from outer left sensor
- Distance from right sensor pair
- Distance from left sensor pair

The distance from the obstacle to the sensor or sensor pair is measured and displayed in the Actual values menu item. This allows the function of the sensors to be checked.

Drive Links

The function of the loudspeaker in the instrument cluster can be checked under the Drive links menu item. A continuous tone is emitted during this test.

Modifying The Coding

The vehicle type Boxster or 911 Carrera (996) can be encoded under the Modify coding menu item.

Procedure:
1. Start the automatic control module search.
2. Select the Park Assistent control module.
3. Select menu item Modify coding.
4. Select vehicle type and press the [F8] key.