GT3

TIGHTENING SPECIFICATIONS
Crankcase Bolts M10 x 1.25 50 Nm (37 ftlb.)
Crankcase Bolts M8 23 Nm (17 ftlb.)

Crankshaft Axial Play
New Installation: 0.05 to 0.24 mm
Wear Limit: 0.28 mm

Vibration Damper on Crankshaft 235 Nm (174 ftlb.)

Plug For Assembly Bore Of Piston Pin 80 Nm (59 ft. lbs.)

Connecting Rod Bolts M9 x 1.25
Initial Tightening: 30 Nm (22 ft. lbs.)
Final Tightening: 1 x 90 degrees
Note: Use special grease 000.043.30012 without fail.
The con-rod bolts must be replaced after they have been unscrewed.