GT3

Maintenance - GT3

Replacing the spark plugs - GT3




Tools

1. Lift the vehicle.

2. Remove shields.





3. Undo the hexagon-head bolts on the plug coils.

4. Pull off the plug coils and detach them to the side with connected cable.




5. Unscrew the spark plugs with the commercially available tool (Snap On tool S9706 or equivalent).

Note: Only this spark plug wrench was tested and approved.


Installing spark plugs - GT3

1. Put on spark plug by hand.




2. Tighten spark plug with commercially available tool S 9706.
Tightening torque:
New spark plug 30 Nm (22 ft. lbs.)
Re-fitting 25 Nm (19 ft. lbs.)

Note: Only this spark plug wrench was tested and approved.

3. Push on the plug coils again.




4. Tighten hexagon socket head bolts to the plug coils to 10 Nm (7.5 ftlb.).

5. Fit shields and tighten to 10 Nm (7.5 ftlb.).

6. Lower vehicle.