Horn: Service and Repair

NOTE: Both horns are fastened on a bracket on the right front side between the body and condenser!







Horn
A - Horn - high-pitch
B - Horn - low-pitch

Removing horn


NOTE:
- The high-pitch horn can be removed from below through the sound outlet opening!
- The entire front spoiler must be removed in order to remove the low-pitch horn!


1. Pull off electrical plug connection and observe installation position of the horn.







2. Unscrew the M6 hexagon nut from the bracket and remove the high-pitch horn through the sound outlet opening.

Installing horn

1. Observe installation position of the horns!
- The horn must not touch the body or a bracket.
- A toothed washer must be fitted between the horn and bracket.

Tightening torque:
- M6 hexagon nut 10 Nm (7.5 ft. lbs.)