Bleeding the Cooling System

NOTE: The cooling system is bled in connection with the Porsche System Tester 2


1. Connect the Porsche System Tester 2 and switch on the ignition.

2. Select menu item "Special function" in the "Vehicle type" menu.

3. Press the [->] key to change to the "Control units" menu.

4. Select menu item "Cooling system" in the "Control units" menu and press the [>>] key.


NOTE: The following message appears on the screen: "Start function with [F8]"


5. Press the [F8] key and follow the further instructions of the Porsche System Tester 2.