Test Point 14

TEST POINT 14
Washer Fluid Level

- Ignition on

- Engine off

PST 2 display: OK

- Check washer fluid level

- Switch off ignition

- Washer fluid level full

- Pull off plug on sensor for fluid level display

- Ohmmeter directly on sensor for fluid level display, pin 1 and pin 2

Display: < 5 ohms

If not, replace sensor for fluid level display.

- Ohmmeter on plug of sensor for fluid level display pin 2 and ground

Ddisplay: < 5 ohms

- Pull off plug II on the instrument cluster

- Ohmmeter on instrument cluster plug II, pin 26 and plug on sensor for fluid level display pin 1

Display: < 5 ohms


See also:
- Drive Links / Washer fluid warning light
Drive Links