Connecting Rod, Engine

Caution:
^ Connecting-rod bolts must not be re-used after unscrewing because they could cause damage to the engine.
^ New connecting-rod bolts must not be screwed on more than 4 times during mounting.

Pre-Tighten Connecting-rod Bolts
- Step 1 Tighten Bolts By Hand
- Step 2 Initial Tightening: 20 Nm (15 ftlb.)
- Step 3 Retighten With 110° Torque Angle

Loosen Connecting-Rod Bolts.
- Step 1 Initial Tightening: 20 Nm (15 ftlb.)
- Step 2 Final Tightening 110° Torque Angle