Cruise Control Servo Cable: Adjustments

Adjusting cruise-control cable

Sequence 1-4:

Sequence 5-7:

1. Loosen snap ring 1 at adjusting piece 2 (displace it) and push threaded part 3 through along with cruise-control cable.

2. Engage cruise-control cable on cruise-control actuator and clip on adjusting piece 4 (bayonet lock).

3. Unscrew threaded part 5 until the accelerator plate is noticeably pulled.

4. Draw accelerator plate firmly back against its idle stop.

5. Push snap ring 6 back (fixing it).

6. Make fine adjustment by turning the threaded part 7.
Permissible play: 0 + 1 mm.