Removing and Installing Head Airbag Unit

Removing and Installing the Head Airbag Unit







Removing head airbag unit







CAUTION:
- Danger of injury and damage to property as a result of incorrect handling of airbag units.
- Always observe the safety regulations for handling airbag units.
- If removed for an extended period, the airbag unit must be kept in a locked place.
- Remove ignition key. Disconnect the battery and cover battery terminal.
- After the battery is disconnected, always wait for 1 minute before disconnecting the airbag plugs.

- Remove A-pillar trim.
- Remove the B-pillar trim.
- Remove C-pillar trim.
- Remove D-pillar trim.
- Removing roof lining.







Installing head airbag unit







CAUTION:
Safety-related bolts.
- Always replace bolts after customer service and reworking.
- it is not permissible to make alterations to the micro encapsulated screws which have a negative effect on the bond (e.g., use lubricant, loosen bolts and screw them down again).







- Install roof lining.
- Install D-pillar trim.
- Install C-pillar trim.
- Install B-pillar trim.
- Install A-pillar trim.

Carry out work instruction after disconnecting the battery.

Tightening Torques