Component Arrangement - Transfer Box

Component arrangement - transfer box






a - CAN drive (CAN-C)

1 - DME control module
- Located in right radiator tank, above hydraulic unit with PSM control unit

2 - Fuse carrier at right of dashboard
- Integrated into right side of dashboard

3 - Level control unit
- Located between rear right wheel housing and closing panel

4 - Transverse lock control unit
- Located between rear left wheel housing and closing panel

5 - Vehicle electrical system control unit (connected to CAN comfort)
- Located on right side of steering column (footwell) near KESSY control unit

6 - Transfer box with components
- Servo motor

7 - Instrument cluster (includes the gateway)
- Integrated into dashboard

8 - Tiptronic control module
- Located on vehicle floor under passenger's seat (LHD) (front right)

9 - Transfer box control unit
- Located on vehicle floor under passenger's seat (LHD) (front right)

10 - Selector switch (running gear control module)
- Located near selector lever module (Tiptronic)

11 - Steering column switch with electronic unit and steering-angle sensor
- On the steering column under the steering wheel

Component arrangement 'Item 6' Transfer box with components






1 - Transfer box servo motor
A - Servo motor plug connection (power and ground supply for brake and motor)
B - Sensor plug connection

Component arrangement 'item 10' Selector switch (running gear control module)






1 - Selector switch housing
2 - Selector switch housing lower part
3 - Symbols 'Level control LED'
4 - Slider 'Manual set level'
5 - Switch 'PASM running gear tuning'
6 - Slider 'Manual set longitudinal lock/transverse lock/gear reduction'
7 - Symbols 'Longitudinal lock/transverse lock/gear reduction LED'