Coding

Coding

The PCM2 can be coded as required under the menu item 'Modify coding'.

Menu item Function

- PCM2 code Under this menu item, the PCM2 code can be coded after replacing the PCM2.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'PCM2' in the Control units menu and confirm with the [>>] key.
- Select 'PCM2 GW' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
- Select the menu item Coding
- Select the menu item "PCM2 code"
- Take the PCM2 code from 'IPAS', enter it in the mask and code it with the [F8] key.

- Country coding You can code the country code using this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'PCM2' in the Control units menu and confirm with the [>>] key.
- Select 'PCM2 GW' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
- Select the Coding menu item and confirm with the [>>] key.
- Select the menu item "Country coding" and confirm with the [>>] key.
- Select "the relevant country coding" in the menu item that is displayed and code it with the [F8] key.