Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2004 >> 911 Carrera 4 (996) F6-3.6L >> Repair and Diagnosis >> Accessories and Optional Equipment >> General Module >> Testing and Inspection >> Programming and Relearning >> PCM2/CDR23 >> CDR23 Control Module Function >> Coding

Coding



Coding

Under the menu item 'Modify coding', the PCM2 codes can be coded on a vehicle and country-specific basis.

Menu item Function

- Vehicle type vehicle coding The CDR23 can be coded in accordance with the vehicle type using this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'CDR23' in the Control units menu and confirm with the [>>] key.
- Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
- Select 'Vehicle type vehicle coding' in the Coding menu and confirm with the [>>] key.
- Select '911 (996)' in the menu and code with the [F8] key.

- Vehicle version vehicle coding The CDR23 can be coded in accordance with the vehicle version using this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'CDR23' in the Control units menu and confirm with the [>>] key.
- Select 'Coding' in the CDR23 function selection and confirm with the [>>] key.
- Select 'Vehicle version vehicle coding' in the Coding menu and confirm with the [>>] key.
- Select "911 (996)" in the menu and code with the [F8] key.

- Right/left-hand The CDR23 can be coded in accordance
drive vehicle coding: with the vehicle model using this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'CDR23' in the Control units menu and confirm with the [>>] key.
- Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
- Select"Right/left-hand drive vehicle coding" in the 911 (996) CDR23 coding function selection and confirm with the [>>] key.
- Select"Right/left-hand drive" in the menu item that is displayed and code it with the [F8] key.

The following selection is available:
- Right-hand drive.
- Left-hand drive.

- Air conditioning You can code the relevant vehicle version
with/without with or without air conditioning using this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'CDR23' in the Control units menu and confirm with the [>>] key.
- Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
- Select"Air conditioning with/without" in the 911 (996) CDR23 coding function selection and confirm with the [>>] key.
- Select 'with or without' in the menu corresponding to the vehicle equipment and code with the [F8] key.

- GAL (noise-dependent You can code the NLB as required using
loud-speaker boost - NLB) this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'CDR23' in the Control units menu and confirm with the [>>] key.
- Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
- Select"GAL (NLB)" in the 911 (996) CDR23 coding function selection and confirm with the [>>] key.
- Select 'Value' corresponding to the desired volume and code with the [F8] key.

- Country coding You can code the country code using this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'CDR23' in the Control units menu and confirm with the [>>] key.
- Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
- Select 'Country coding' in the CDR23 coding function selection and confirm with the [>>] key.
- Select "RoW or USA" and code with the [F8] key.

- PCM2 code It is possible to code the PCM2 code under this menu item after replacing the CDR23.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'CDR23' in the Control units menu and confirm with the [>>] key.
- Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
- Select 'PCM2 code' in the CDR23 coding function selection and confirm with the [>>] key.
- Take the PCM2 code from 'IPAS', enter it using the arrow keys and code it with the [F8] key.

- Production mode You can code the production mode using this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'CDR23' in the Control units menu and confirm with the [>>] key.
- Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
- Select 'Production mode' in the 911 (996) CDR23 coding function selection and confirm with the [>>] key.
- Select 'Production mode ON/OFF' in the CDR23 coding function selection and confirm with the [F8] key.

- Tuner parameters You can code the tuner parameters using this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'CDR23' in the Control units menu and confirm with the [>>] key.
- Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
- Select 'Tuner parameters' in the 911 (996) CDR23 coding function selection and confirm with the [>>] key.
- Select the required 'tuner parameters' in the CDR23 Modify coding function selection and code with the [F8] key.

- Traffic broadcast You can code the traffic broadcast
loudspeaker boost loudspeaker boost using this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'CDR23' in the Control units menu and confirm with the [>>] key.
- Select 'Coding' in the 911 (996) CDR23 function selection and confirm with the [>>] key.
- Select 'Traffic broadcast loudspeaker boost' in the 911 (996) CDR23 coding function selection and confirm with the [>>] key.
- Use the arrow keys to select the required 'traffic broadcast loudspeaker boost' in the CDR23 Modify coding function selection and code with the [F8] key.
pro multis · About Operation CHARM