Oil Pump

Disassembling and assembling oil pump - engine removed

Caution
When working on the engine, absolute cleanliness is essential! An engine cover should be used on the engine assembly support. Lay removed engine parts on a clean base and cover them without fail. Even the smallest particles of dirt can block up oil bores.

1. Remove oil pump lid.





2. Lay oil pump lid on a clean base.





Oil pump components

3. Disassemble oil pump -see figure-.





4. Assemble oil pump. To do this, clean the components and coat with fresh engine oil. Install pressure relief valve when fitted.

Tightening torque pressure relief valve 25 Nm (19 ftlb.)

5. Install oil pump lid.