Telephone/Telematics

Vehicle hand-over
The PCM2 is converted to delivery mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, roll-over bar), the PCM2 must be activated with the 9588 Porsche System Tester II.
1. Connect and start the 9588 Porsche System Tester II and switch on the ignition.
2. Select 'Special functions' in the Vehicle type menu and confirm with the [>>] key.
3. Select 'Vehicle hand-over' in the Control units menu and confirm with the [>>] key.
4. Follow the instructions on the 9588 Porsche System Tester II

,*, display in the 'Control units' and 'PCM2 MOST component check' menu
Different required and actual installed components lists

When the 'automatic control module search' is complete, an asterisk ('* ') appears in front of the control module description 'PCM2' in the 'Control units' menu, as well as in the 'PCM2 MMI function selection' in front of the entry 'MOST required installed components list' if the 9588 Porsche System Tester II establishes a difference between the required and actual installed components list and there is no fault code in one of the fault memories of the MOST control modules.

If there is a fault code present in one of the MOST control modules, the display '*' is only shown in the 'PCM2 MMI function selection' in front of the line 'MOST required installed components list'.

If an asterisk is displayed in the Control units menu, an existing fault code has priority and a '#' is set.