Installing Shift Console

Installing shift console

Note: The shifting element is designed so that installation and adjustment are a single work step.

- Precondition:
^ Special tool (locking bridge) 9619 must be fitted to fix the shift lever.
^ The transmission must be in neutral.

1. Insert the shift console and tighten the fastening nuts.
Tightening torque: 10 Nm (7.5 ft. lbs.)





2. Insert the support brackets -E- in the correct position in the shift console. It must be possible to hear and feel the support brackets engage.
A Selector cable (blue)
B Shift cable (black)
C Adjuster open
D Adjuster closed
E Support bracket sleeve
3. Engage the shift cable -B- and selector cable -A- in the open adjusters -C- and close the adjusters. The locking sleeves on the adjuster must move to the end position automatically.
4. Remove special tool (locking bridge) 9619 and shift through all gears as a test.
5. Clip in shift console cover.
6. Install center console.