Accelerator Pedal Position Sensor 1 Signal Implausible

P1577 - ACCELERATOR PEDAL POSITION SENSOR 1 SIGNAL IMPLAUSIBLE

Diagnosis conditions
- Ignition on (approx. 30 sec.)
- Battery voltage greater than 7 V

Possible fault cause
- Pedal sensor

NOTE:
- The system operates in pedal sensor standby mode, i.e. the angle of the accelerator pedal is calculated from the residual position sensor signal.
- The maximum pedal value is limited to 30 %.
- The dynamic is limited.

Diagnosis/Troubleshooting

Step 1: