Removal Cylinder Head - GT3

Removal cylinder head - GT3

Removing cylinder head
- Preliminary work: Removing the camshaft housing

1. Remove the seal between the camshaft housing and the cylinder head. Do not use the seal again.





2. Unscrew cylinder head. Unscrew the twelve internal-serration screws in 1/2-turn steps in the order specified. Work according to the order specified in order to avoid distorting the cylinder head.
3. Remove cylinder head. Lift cylinder head straight upward.

Warning:
Risk of damage!
- Under no circumstances may carbon deposits on the pistons be removed by mechanical means