Test Point 14

Test Point 14

Washer fluid level
- Ignition on
- Engine off

PST2 display: OK
- Check washer fluid level
- Switch off ignition
- Washer fluid level full
- Pull off plug on sensor for fluid level display
- Ohmmeter directly on sensor for fluid level display, pin 1 and pin 2
Ohmmeter display: <5 Ohms.
If not, replace sensor for fluid level display.

- Ohmmeter on plug of sensor for fluid level display pin 2 and ground
- Ohmmeter display: < 5 Ohms.

- Pull off plug II on the instrument cluster
- Ohmmeter on instrument cluster plug II pin 26 and plug on sensor for fluid level display, pin 1
Ohmmeter display: < 5 Ohms.

- See also Drive Links chapter, "Washer fluid warning light"