Test Point 2

Test Point 2

Signal, terminal 61
- Ignition on
- Engine off

PST2 display: not present
- Engine idling

PST2 display: present
- Engine idling
- Measure voltage between both poles on the battery
Voltmeter display: > 13 V
Check generator in the case of deviations

- Switch off ignition
- Pull off plug II on the instrument cluster
- Switch ignition on
- Measure the voltage on the instrument cluster plug II, pin 23 and ground
Voltmeter display: 0 V

- Engine idling
- Measure the voltage on the instrument cluster plug II, pin 23 and ground
Voltmeter display: > 13 V

- Switch off ignition
- Disconnect plug on generator (terminal 61)
- Switch ignition on
- Measure the voltage on the instrument cluster plug II, pin 23 and ground
Voltmeter display: 0 V

- Switch off ignition
- Ohmmeter on instrument cluster plug II pin 23 and ground Ohmmeter display: Infinite Ohms

- Ohmmeter on instrument cluster plug II pin 23 and plug on generator (terminal 61)
Ohmmeter display: < 5 Ohms.