Cell Phone - Installation Preparation: Overview

911 (996)

2/04 9187

Binder - 9, Electrics

Date: 4-1-04

Preparation For Mobile Phone Installation Instructions

Vehicle Type:
911 Carrera (996) /911 Carrera 4 (996) /911 Targa (996) /911 GT3 (996)

Model Year:
as of '01 (1)

Concern:
Installing telephone preparation kit. Only for USA/Canada vehicles with the following radios:

CR220/CDR22O/CDR 23 or TrafficPro

Information:
Telephone preparation for mobile telephones contains an antenna integrated in the radiator tank, various wires, a microphone, as well as a bracket for the mobile telephone holder. The hands-free microphone must be set to the type of mobile phone (see Technical Manual, Group 9, Part ID. 9157).

The respective rigging set of the mobile telephone, which enables phone use with the hands-free unit, is connected to the 18-pin plug in accordance with the VDA standard (VDA = Verband Deutscher Automobilhersteller - Association of German Automobile Manufacturers).





If the mobile telephone is not installed at the same time, the 18-pin plug and the antenna coupling remain under the center console. The holder contained in the set including mounting elements should be left if the vehicle for later installation of the telephone.








Parts Information:





Parts List

Warning!
Risk of short circuit and fire - due to work on vehicle electrical system.
> When working on the electrical system, the battery must be disconnected and covered. Always route the electrical leads without tensile stress and so that no chafing occurs and secure with tie-wraps/insulating tape to existing lines / components.





Material:





Tools:





Working Time:





Literature:

Technical Bulletins Filed in the Technical Manual Group 9, # 3/04 - Telephone Module

Technical Bulletins filed in the Service Technical Bulletin Binder
Group 9 # 0401 - THB System 8 Telephone Installation Instructions

Parts Bulletin
Group 9, # 013 - Porsche Tequipment Cell Solutions





Disclaimer