System Specifications

Assembly Work on the Air-Conditioning System

Distribution of the Oil Quantity In the Refrigerant Circuit

NOTE:
- Oil removed by suction must be returned to the system.
- Refrigerant oil removed from a previously run air-conditioning system may no longer be used (special-category waste).
- After the refrigerant has been removed by suction and a component has been replaced, the oil quantity must be determined and topped up by the quantity remaining in the removed component.


Oil quantity
Total oil quantity 195 ± 15 cubic cm

After suction removal from the system, the following quantities remain in the:

Condenser (2 x 20 cubic cm) approx. 40 cubic cm
Evaporator approx. 30 cubic cm
Fluid tank with lines approx. 30 cubic cm
Compressor approx. 50 cubic cm
Circulating oil quantity in the refrigerant circuit approx. 60 cubic cm