Wheel Stud / Lug Nut

TIGHTENING SPECIFICATIONS
Wheel Bolts 130 Nm (96 ft. lbs.)

NOTE:
- Screw in wheel bolts by hand and then tighten evenly.
- Start at the top when tightening.

NOTE:
- Apply a thin coating of Optimoly TA, or equivalent, aluminium paste to the thread, shank and below the head of the wheel bolts (between bolt head bearing surface and spherical cap ring).
- Do not coat the spherical cap bearing surface facing the wheel.
- If heavily contaminated, clean screws first with a lint-free cloth.