Removing and Installing Engine Guard

Removing and installing engine guard
Removing engine guard





1. Remove the front engine guard. To do this, loosen the screws -1- at the front and side. Then loosen the rear -2- and front screws -3- .





2. Remove rear engine guard. To do this, loosen the fastening screws on the transmission cross member -1- and the screws on the traverse strut -2- .

Installing engine guard
1. Install the rear engine guard. To do this, tighten the front fastening screws -2- and rear fastening screws -1 - .
2. Tighten the front fastening screws -3- and rear fastening screws -2- . Finally, tighten the screws -1- at the right and left.