Lighting and Horns: Application and ID

Bulb Table And Installation Instructions

Bulb Table

Lamp Shape, Output
Dipped beam, halogen H7, 55 W
High beam, dipped beam (Bi-Xenon headlights) D1S, 35 W
High beam, halogen H7, 55 W
Auxiliary high beam headlight H7, 55 W
Cornering light H3, 55 W
Fog lights H11, 55 W
Parking light, front W, 5 W
Direction indicator light, front PY, 21 W
Side marker light (USA) WY, 5 W
Side direction indicator light W, 5 W
Direction indicator light, rear P, 21 W
Number plate light C, 5 W
Brake light P, 21 W
Reverse light P, 21 W
Rear fog light P, 21/ 4W
Tail light P, 21/ 5W
Interior lights, front W, 5 W
Reading light W, 5 W
Engine compartment light W, 5 W
Door lock/exit light W, 5 W
Footwell light W, 5 W
Glove compartment light W, 5 W
Center console W, 5 W
Warning light W, 5 W
Luggage compartment lights K 12 V 10 W

Installing Bulbs

CAUTION:
- Danger of injury:
- When installed, the headlight is under high voltage.

- Danger of damage to property if bulbs are used or handled incorrectly:
- Only bulbs specified in the bulb chart may be used.
- Bulbs with a higher wattage may cause damage to the bulb housing.
- To prevent short circuits, the load in question must be switched off while bulbs are changed.
- New bulbs must be clean and free of grease. Therefore, never touch bulbs with your bare hands. To change the bulbs, use a cloth or soft paper.
- Observe the safety instructions when replacing a bulb in a Bi-Xenon headlight.
- In certain states, it is compulsory to carry spare light bulbs.