Door Switch: Service and Repair

Removing And Installing Door Contact Switch







Removing Door Contact Switch
1. Remove door lock.







2. Unscrew fastening screw "1" and pull the holder and plug upwards "arrow".







3. Pull the plug out of the holder "arrow A".
4. Disengage wire from holder "arrow B" and remove it by pulling upwards "arrow C".







5. Lever out fastening clip with a suitable screwdriver "arrow A" and remove the clip and the door contact switch "arrow B".

Installing Door Contact Switch







1. Install door contact switch in the locking bores "arrow A" and fasten it to the door lock with the fastening clip "arrow B".







2. Press plug into the holder "arrow A" until it clicks into place.
3. Insert electrical wire "arrow B" and lay it in the guide "arrow C".







4. Insert the holder and plug in the door lock "arrow" and tighten with the fastening screw "1".
5. Install door lock.