Fog/Driving Lamp: Service and Repair

Removing And Installing Fog Lights







WARNING: Risk of short circuit: Before removing the headlight, take out the ignition key and switch off the light switch.

For naturally-aspirated engines, the wheel housing liner must be partially removed.
For turbocharged engines, the air grille in the front spoiler must be removed.

Removing Fog Lights







1. Disconnect the electrical plugs.
2. Loosen the 4 fastening screws or unscrew them fully and remove the headlight.

Installing Fog Lights







1. Position the headlight and tighten the 4 fastening screws. Tightening torque 3 Nm (2 ftlb.).
2. Connect the electrical plugs.

For naturally-aspirated engines, the wheel housing liner must be installed.
For turbocharged engines, the air grille in the front spoiler must be installed.

Fog Light Adjustment







Insert a hexagon socket screwdriver through the opening "A" in the front spoiler and adjust the fog light.