Horn: Service and Repair

Removing And Installing Horn

Naturally-aspirated engine:
- Before the horn can be removed, the respective wheel housing liner must be partially disassembled.
- Remove the ignition key.

Turbocharged Engine:
- Before the horn can be removed, the front bumper must be disassembled. Refer to Removing and installing front bumper.
- Remove the ignition key.

NOTE: There is a horn at the front left and front right in the area of the fog lights.

Removing Horn







1. Unscrew the hexagon-head bolt and disconnect the electrical plug connection.
2. Remove the horn.

Installing Horn







Connect the electrical plug, position the horn in place and secure with the hexagon-head bolt. Tightening torque 20 Nm (15 ftlb.).

Naturally-aspirated engine:
Secure the wheel housing liner.

Turbocharged engine:
Install front bumper.