Component Arrangement, Off-Road Stabilisers

Component arrangement, off-road stabilisers






1 - Front-axle sensor
- Screwed to the centre part of the hydraulically disengageable off-road stabiliser on the front axle

2 - Hydraulically disengageable off-road stabiliser, front axle

3 - Button for hydraulically disengageable off-road stabilisers
- Located near selector lever module (Tiptronic)/shift lever

4 - Hydraulic control unit
- Installed in rear left of luggage compartment behind side-panel lining (or behind rear air-conditioning unit)

5 - Pressure sensor
- Screwed into the hydraulic control unit

6 - Off-road stabiliser control module (ORS control module)
- Integrated into rear left spare-wheel well

7 - Rear-axle sensor
- Screwed to the centre part of the hydraulically disengageable off-road stabiliser on the rear axle

8 - Hydraulically disengageable off-road stabiliser, rear axle

Component arrangement 'item 3': Button for hydraulically disengageable off-road stabilisers






1 - Gear selection switch housing
2 - Selector switch housing, lower part
3 - 'Level control LED' symbols
4 - 'Manual set level' slider
5 - 'PASM running gear tuning' switch
6 - 'Hydraulically disengageable off-road stabilisers' button
7 - 'Manual set longitudinal lock/transverse lock/gear reduction' slider
8 - 'Longitudinal lock/transverse lock/gear reduction LED' symbols