Drive Axles, Bearings and Joints: Testing and Inspection

Cardan Shaft Maintenance

NOTE:
- The rolling lobes of the cardan shafts can be damaged by external influences, e.g. off-road driving or similar use.
- Result: large amount of grease emerges, dirt can work its way into the universal joints.
- Early replacement of the cardan shaft may be required.

Visual inspection of the rolling lobes (front cardan shaft)
1. Remove engine guard.
2. Check cardan shaft rolling lobes for damage. To do this, gradually turn the cardan shaft once by 180°.
3. Install engine guard.

Visual inspection of centre bearing (rear cardan shaft)
1. Check rolling lobe of centre bearing for damage. To do this, gradually turn the cardan shaft once by 180°.