Fire Suppressor Bottle: Service and Repair

Removing And Installing Fire Extinguisher (Front Seat)

Technical values







Removing fire extinguisher







1. Release restraining strap -1- by pressing the button -arrow A-.







2. Remove fire extinguisher -2- from the tray -3- (-arrow B-).

Removing tray for fire extinguisher

1. Move front seat to the uppermost position.
2. Unscrew fastening screws -1- and remove tray -2- (-arrows-).







3. Disassemble tray.







3.1. Pull restraining strap -1- out of the lower opening in the tray -2- (-arrow A-).
3.2. Pull tray holder -3- out to one side -arrow B-.
3.3. Slide restraining strap -1- completely out of the tray -2- (-arrow C-).

4. Loosen wire harness for control panel -1- by opening the tie-wrap -2- on the fire extinguisher holder -3-.







5. Unscrew fastening screws -4- and remove fire extinguisher holder -3- (-arrow-).

Installing fire extinguisher

Installing tray for fire extinguisher

INFORMATION: Only for vehicles with air-conditioned comfort seat.

Make sure that the wire harness for the fan is not trapped or damaged.

1. Install fire extinguisher holder.







1.1. Position fire extinguisher holder -3- (-arrow-).
1.2. Coat fastening screws -4- with Loctite 243 and tighten them. Tightening torque: 10 Nm (7.5 ftlb.)
1.3. Secure wire harness for control panel -1- with the tie-wrap -2- on the fire extinguisher holder -3-.

2. Assemble the tray.







2.1. Pull restraining strap -1- through the upper opening in the tray -2- (-arrow A-).
2.2. Slide tray holder -3- through into the restraining strap -1- (-arrow B-).
2.3. Slide restraining strap -1- through the lower opening in the tray -2- (-arrow C-).

3. Position tray -2- (-arrows-) and secure with the fastening screws -1-. Tightening torque: 10 Nm (7.5 ftlb.)







Installing fire extinguisher

1. Insert fire extinguisher -2- into the tray -3- (-arrow A-) and lock it with the restraining strap -1- (-arrow B-).