Instruments - PCM2.1 Logbook Coding

911 (997)
14/05 9110

PCM2.1 - Logbook (I No.641)

Binder - 9, Electrical System
This bulletin replaces technical
bulletin Group 9, #14/05, dated 8-17-05.

Date: 7-11-08

Vehicle Type:
911 Carrera (997)/911 Carrera S (997)

Model Year:
2005 (5) to 2008 (8)

Concern:
Coding logbook

INFORMATION:
The PCM2.1 logbook supports the driver in maintaining a logbook by recording all relevant data for the type of trip (private, business), much of it automatically, and reducing user input to a minimum. PCM2.1 automatically records every trip > 60 miles/100 kilometers. Trip recording starts as soon as the key is inserted into the ignition and ends when it is removed. PCM2.1 will automatically record the following data.

- Date/time of departure and arrival
- Mileage at the start and end of the journey
- Start and destination address (location, street, country)
- GPS coordinates for business and work trips

The recorded data can be copied from PCM2.1 to a laptop or Personal Digital Assistant (PDA) via the PCM2.1 infrared interface. It can be read in, edited and printed using the accompanying PC software,

After ordering, i.e, entering the part number and Vehicle Identification Number (VIN) in SAP, the enabling code should be displayed after one day once the VIN is entered in the integrated Porsche Dealer Handling System (IPAS).

IMPORTANT:
It is absolutely essential that you update the PCM2.1 system connection to the Model Level B software for model year 05, see Technical Information Bulletin, Group 9, # 13/05 - PCM2.1 Navigation Update'. Model Level B is standard as model year 06.

Parts Information:

Parts Number Description
955.044.900.29 Logbook
Includes:
1 x 997.642.148.02 Logbook CD-ROM

NOTE:
The operating instructions and quick Reference Guide for PCM2.1 are not included in the scope of delivery and must be ordered separately for model year 2005 in required language.

Part Number Description

WKD 951 324 06 PCM Operating instructions
WKD 951 224 06 PCM Quick Reference Guide

Tools:
PIWIS Tester P 9718
Battery Charger

Work Procedure:
1. Connect battery charger,> Workshop Manual '271000 Battery trickle charge'
2. Code logbook in PCM2.1.
2.1 Connect PIWIS Tester and switch on ignition.
2.2 Select vehicle type "911 (997)" and control unit "PCM2.1". Press [F12] to continue.
2.3 Select "PCM2 MMI" in the 911 (997) PCM2.1 function selection. Press [F12] to continue.
2.4 Select "Coding" in the PCM2.1 MMI function selection. Press [F12] to continue.
2.5 Select "Clearance code" in the 911 (997) PCM2.1 MMI coding function selection. Press [F12] to continue.
2.6 Enter enabling code. Code with [F8]. Wait until the message "Coding has been changed"appears.
2.7 Select "Timeouts" in the 911 (997) PCM2.1 MMI coding function selection. Press [F12] to continue.
2.8 Select "Display logbook menu after start" and code value "15". Press [F8] to continue. Wait until the messages "Coding has been changed" appears.
2.9 Press [F11] to exit the PCM2.1 menu.
2.10 Read out fault memory and erase it if necessary.
2.11 Switch off ignition and disconnect PIWIS Tester.

3. Disconnect battery charger.
4. Perform function test during test drive.

NOTE:
Further information can be found in the related operating instructions.

4.1 Active logbook.
4.2 Test drive subsequent of list of trips.
4.3 Deactivate logbook.
4.4 Clear entries in logbook.

Working Time

References:
Workshop Manual '271000 Battery trickle charge'
Technical Information Bulletin, Group 9 #13/05 '911025 PCM2.1 navigation update' PCM Operating Instructions.

Tools:
PIWIS Tester P 9718
Battery Charger

Work Procedure:
1. Connect battery charger. > Workshop Manual '271000 Battery trickle charge'
2. Code logbook in PCM2.1.
2.1 Connect PIWIS Tester and switch on ignition.
2.2 Select vehicle type "911 (997)" and control unit "PCM2.1". Press [F12] to continue.
2.3 Select "PCM2 MMI" in the 900 (997) PCM2.1 function selection. Press [F12] to continue.
2.4 Select "Coding" in the PCM2.1 MMI function selection. Press [F12] to continue.
2.5 Select "Clearance code" in the 911 (997) PCM2.1 MMI coding function selection. Press [F12] to continue.
2.6 Enter enabling code. Code with [F8]. Wait until the message "Coding has been changed"appears.
2.7 Select "Timeouts" in the 911 (997) PCM2.1 MMI coding function selection. Press [F12] to continue.
2.8 Select "Display logbook menu after start" and code value "15". Press [F8] to continue. Wait until the messages "Coding has been changed" appears.
2.9 Press [F11] to exit the PCM2.1 menu.
2.10 Read out fault memory and erase it if necessary.
2.11 Switch off ignition and disconnect PIWIS Tester.

3. Disconnect battery charger.
4. Perform function test during test drive.

NOTE:
Further information can be found in the related operating instructions.

4.1 Active logbook.
4.2 Test drive subsequent of list of trips.
4.3 Deactivate logbook.
4.4 Clear entries in logbook.

Working Time

References:
Workshop Manual "271000 Battery trickle charge"
Technical Information Bulletin, Group 9 #13/05 '911025 PCM2.1 navigation update' PCM Operating Instructions.

Disclaimer