Additional Alarm System M 534

Additional Alarm System M 534

INFORMATION: Vehicles for Great Britain and Belgium are equipped with an alarm siren and tilt sensor in addition to the standard alarm system. M 590 (lid release locks) is also standard equipment in these vehicles.

Removing alarm siren and tilt sensor
1. Remove cover for fluid reservoir (air conditioning).
2. Pull off connector on the alarm siren.
3. Pull off connector on the tilt sensor.







4. Undo nut.

Removing and installing actuating element for lid release
1. Remove handle liner.
2. Remove bracket with actuating elements.







3. Unscrewing fastening screws.

INFORMATION: Electrical locking of the rear lid release has been omitted on vehicles manufactured after March '99. Front lid release locking is still carried out electrically.

Electric locking is carried out by the alarm system control module and is valid for the following country codings:

USA, England and Belgium