PCM2(R) - Right Control Knob Loose/Slipping

911 (997)
6/04 9110

PCM2.1 Right Knob Is Loose (Slips)

Vehicle Type:
911 Carrera (997)/911 Carrera S (997)

Model Year:
2005 (5)

Concern:
PCM2 (I No. 665) right hand control knob is loose (slips) when rotating.

Information:
This slippage is caused by control module tolerances and temperature effects, which lead to a reduced contact force in the right hand control knob.

A modified right hand control knob has been installed since July, 2004. In the event of a complaint, install the modified control knob. Replacement of the PCM2.1 for this issue will not be honored under warranty.

The right hand and left hand control knobs are now available as individual parts from the Parts Department using normal ordering procedures.

Introduction:
July, 2004





Parts Information:

Tools:
Relay puller (special tool 9235)

Work Procedure:

Replace the control knob on the PCM2.1.

Caution!
Damage to the PCM control panel when removing the control knob with the incorrect tool.

> Due to the high tractive force of the control knob, use special tool 9235 (relay puller) to remove the control knob.





Working Time:

Reference:
Porsche Special Tool Catalog
> Tool No. 9235: Relay puller





Disclaimer