Antitheft and Alarm Systems: Service and Repair

Removing And Installing Passenger Compartment Monitoring Sensor

Removal







1. Using a small screwdriver, carefully unclip both cover lenses at the openings provided. Undo fastening screws M 5 with a cross-head screwdriver (arrow A).
2. Unclip sensor holder at the rear left and right (arrow B), push forward towards the windshield and remove. Pull off electrical plug connection.
3. Unclip passenger compartment monitoring sensor at the side and remove from the sensor holder.

Installation
1. Do not press on or touch the transmission/reception diodes with your fingers.
2. Engage the electrical plug connections and carefully lay the electrical cables (do not pinch).
3. The cover lenses must not be soiled or smudged with grease. Clip in cover lenses again.