Convertible Top Repair - After Emergency Operation

Convertible Top Repair - After Emergency Operation

Preliminary work
1. Removing rear wall trim panel Refer to Removing and installing trim panel for rear wall
2. Open hydraulic valve of the hydraulic pump. Refer to Removing and installing hydraulic pump
3. Remove cover.
3.1. Pull off cover from convertible top lock.






4. Move locking hook to end position.
4.1. Insert the Allen key -1- into the convertible top lock -A- and move in the direction of the arrow "Open" (inscription on convertible-top lock) until the locking hook is in the extended end position (perceptible stop).






Convertible top repair - after emergency operation

Repairing convertible-top compartment lid drive
1. Open convertible-top compartment lid.
1.1. Insert Allen key (tool kit) -1- into the drive axle -2- and turn it anti-clockwise until the convertible-top compartment lid -inset- is fully open (perceptible stop).






2. Close convertible-top compartment lid.
2.1. Grasp convertible-top compartment lid -1- above the brake light and push forward until it is closed.






3. Loosen hexagon socket head bolt.
3.1. Turn Allen key (tool kit) -1- clockwise until the hexagon socket head bolt -2- (left-hand thread) is unscrewed.






4. Bond in hexagon socket head bolt.
4.1. Coat hexagon socket head bolt -1- with medium-strength screw-locking compound and screw it in by three turns (left-hand thread).






Subsequent work
1. Close hydraulic valve on the hydraulic pump. Refer to Removing and installing hydraulic pump
2. Calibrate cabriolet convertible top. Refer to K2 - Calibrating cabriolet convertible top
3. Install rear wall trim panel. Refer to Removing and installing trim panel for rear wall