Fitting Running Gear Parts

Fitting running gear parts

Warning! Danger of accident and material damage. If the mounting specifications are not observed, the long-life behavior of screw connections cannot be guaranteed (connections can become loose) and/or restriction of the service life or function of components is possible.
^ Carry out an exact visual inspection of all parts used on the chassis!
^ Use only original spare parts approved by Porsche.
^ Replace self-locking nuts.
^ When fitting control arms on the wheel carrier, ensure that the bevel pinions are clean. If necessary, clean with lint-free cloth. Do not use a cleaning agent.
^ Specified tightening torques should be strictly observed.
^ Observe grease specification (for example on drive shafts).