Fitting Front Transmission Case Cover
Fitting front transmission case coverFitting cover
1. Coat front transmission case cover with Loctite 574, position it and screw in fastening screws.
Tightening torque: 23 Nm (17 ft. lbs.)
Note!
^ Steps 2 to 6 are used only for G96/96 transmissions (model year 2004).
2. Fit the oil pump. To do this, drive in oil pump with a rubber hammer and screw in screws.
Tightening torque: 23 Nm (17 ft. lbs.)
3. Fit oil cooler. To do this, screw in hexagon socket head bolt -A- and two hexagon-head bolts -B-.
Tightening torque for hexagon socket head bolt: 10 Nm (7.5 ft. lbs.)
Tightening torque for hexagon-head bolt: 23 Nm (17 ft. lbs.)
4. Fit connecting hose for oil cooler housing.
5. Fit electric cable.
6. Fill with transmission oil.
7. Remove transmission from assembly support and fit onto the engine.
Tightening torques