Dismantling Input Shaft

Dismantling input shaft

Overview





No. Designation Qty.
1 Hexagon nut (self-locking) 1
2 Cylindrical-roller bearing 1
3 Bearing inner race 1
4 Four-point bearing 1
5 Tensioning plate 1
6 Bearing inner race 1
7 Shift rod / 3rd/4th gear shift fork 1
8 Locking element 1
9 Thrust plate 1
10 Loose gear wheel, 4th gear 1
11 Synchronising ring 1
12 Needle-roller bearing 1
13 Bearing inner race 1
14 Guide sleeve 1
15 Shift collar 1
16 Driver dog 3
17 Ball 3
18 Spring 3
19 Synchronising ring 1
20 Loose gear wheel, 3rd gear 1
21 Needle-roller bearing 1
22 Input shaft 1

Disassembling shaft





1. Clamp complete shaft into the vice with gear set and special tool socket wrench insert 9282.





2. Remove fastening nut.
3. Press off loose gear wheel for 3rd gear (no. 20 in overview) with synchronization (nos. 11 to 19 in overview), loose gear wheel for 4th gear (no. 10 in overview) and the remaining parts (nos. 2 to 9 in overview).