Procedures

966255 Replacing Hand-held Transmitter

Disassembling hand-held transmitter

Removing cover of hand-held transmitter:

1. Insert a small screwdriver between the cover and the bottom part of the hand-held transmitter -arrow- and carefully lift off the cover.

Removing hand-held transmitter key

Removing hand-held transmitter key:

1. Push the sliding latch back using a small screwdriver -arrow A- and pull the key out of the bottom part.

Removing battery for hand-held transmitter

Removing battery for hand-held transmitter:

1. Loosen the locking tab -arrow a- and remove the battery.

Assembling hand-held transmitter

Installing battery for hand-held transmitter

Installing battery for hand-held transmitter:

1. Insert battery and press it in until the locking tab clicks into place.

Installing hand-held transmitter key

NOTE: The lock code from IPAS must be specified when ordering a new key.

Installing hand-held transmitter key:

1. Push the key into the bottom part until the sliding latch -arrow- engages perceptibly.

Installing cover of hand-held transmitter

Installing cover of hand-held transmitter:

1. Position the cover on the bottom part of the hand-held transmitter and press together until the cover clicks into place.